First, the plate class
Plate type office furniture is a removable plate structure, the use of hardware connections, transport and convenient and durable.
1. Although the surface of the fire board has a certain hardness, the desktop should not acid, alkali corrosion substances, to prevent the collision of hard objects and knife scribe, causing damage to the table.
2. Countertops is prohibited to put too heavy, so as not to bend the table.
3. Table, cabinet furniture, moving to lift off the ground, do not pull hard to push, so that leg plate loose or damaged.
4. Door and drawers, etc. should be light pull, light to reduce the impact of vibration on the furniture, hardware accessories should always refueling.
Second, solid wood category
Solid wood office furniture used in the management level of the office, and home solid wood furniture in the maintenance of similarities.
1. often with a soft cloth along the wood texture, dust for the furniture, before going to dust, should be stained on a soft cloth (Bi Lizhu), do not wipe with a dry cloth to avoid rubbing.
2. To avoid direct sunlight, so as not to surface oxide film, furniture, yellow, color. Solid wood furniture in a more dry environment, the need for artificial humidification measures, such as: regular use of soft cloth wring dry wipe the furniture.
3. Note that the film protection, to guard against hard objects collision and knife scoring, not on the desktop copy copy. Try to avoid the furniture surface contact with corrosive liquids, such as: alcohol, nail polish, gasoline, acid, alkali and so on.
4. Door and drawers, etc. should be light pull, light to reduce the impact of vibration on the furniture, hardware accessories should always refueling.
Office Computer Desk With Monitor and Printer Shelf
Third, leather class
Leather office furniture is particularly vulnerable to wear and use when the threat, in the maintenance of not only need care, but also need to pay attention to the location, sitting and so on.
1. To ensure that the ventilation room, the air is too dry or wet will accelerate the aging of the leather.
2. leather sofa do not put the sun to the ground, do not put directly on the air-conditioning place, this will make the leather hardened. Direct sunlight will fade the colored leather surface.
3. After taking the sedentary should always pat the sedentary parts and the edge, to restore the status quo, to reduce the concentration of sitting due to the phenomenon of depression.
4. wipe the sofa, do not rub with a strong, so as not to damage the epidermis, but can not use alkaline cleaning fluid, gasoline organic solvents, leather will reduce the flexibility, long-term use of wrinkles.
5. Wipe the sofa need to use soft cotton velvet, if the water should be quickly dry, if the mold need to use special maintenance agent sofa and skin care products to prevent the leather faded rough variant.
Fourth, cloth class
Cloth furniture is susceptible to fading, contamination, pilling and other threats, and the use of leather sofa, there are also need to pay attention to the place.
1. Regularly clean up the dust and residue, with particular attention to remove the dust between the fabric structure, such as stained with dirt to be immediately removed, so as not to leave the mark.
2. If the fabric surface pulsating ball, loose thread, can not hand torn, you can use a small scissors or electric hair to cut it.
3. To avoid sitting on the sofa the same location, occasionally change the location or replace the seat cushion position, you can maintain a balanced life of the sofa.
4. To avoid the sofa directly by the sun, because the fiber will make the fabric fiber loss of elasticity, become fragile and faded.
Five, swivel class
Swivel chair is the office wear the largest furniture, 8 hours a day sitting on the above will give a big threat to the chair.
1. Leather, cloth, solid wood armrest maintenance please refer to the front.
2. should not be placed in direct sunlight, so as not to cloth or leather surface fade, premature aging, glue off.
3. chair sitting, should pay attention to the legs of the legs of the uniform force, do not side by side, so as not to force uneven, damage the strength of the chair structure.
4. chair gas rod movements, before and after the tilt should be light pull, light moving, do not force too much, hardware accessories should always refueling.
Sixth, the screen class
1. Fire board surface, cloth, maintenance, please refer to the front.
2. Screen surface to prevent hard objects collision, so as not to scratch, depression.
3. should not let the sun direct, so as not to fade the fabric, premature aging, glue off.
4. After the screen should not be fixed after the random drag, free disassembly, should be requested to install the professional staff.